

This document describes ValueRAM's KVR24S17S6/4 as a 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
CL(IDD) |
17 cycles |
Row Cycle Time (tRCmin) |
45.75ns(min.) |
Refresh to Active/Refresh Command Time (tRFCmin) |
350ns(min.) |
Row Active Time (tRASmin) |
32ns(min.) |
Maximum Operating Power |
TBD W* |
UL Rating |
94 V - 0 |
Operating Temperature |
0°C to +85° C |
Storage Temperature |
-55° C to +100°C |
Features:
- On-board I2 serial presence-detect (SPD) EEPROM
- 8 internal banks; 2 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.18” (30.00mm)
- RoHS Compliant and Halogen-Free
Bus |
2400 MHz |
Kích thước |
|
Dung lượng |
4GB |
Kiểu Ram |
DDR4 |